Main Features
- Simple and safe sampling from tanks and reactors.
- Application-specific system design.
- Dead-space-free design for representative sampling.
- Self-draining, space-saving design.
- Advanced system for mounting specified additional components.
- User-friendly design with maximum safety.
- Permanent monitoring possibility before and during sampling.
Safety
SRS systems from Swissfluid meet the highest safety requirements. The self-draining unit is mounted at the top, eliminating the possibility of leakage. In addition, the unit is easy and safe to operate by the user.Operating conditions SRS-P
(dep. on material selection/spindle sealing)
- Pressure:
- main valve: 500 mbar (87.25 psi) up to 16 bar (232 psi)
- sight glass unit: 500 mbar (87.25 psi) up to 10 bar (145 psi)
- Temperature: -40°C (-40°F) up to 180°C (356°F)
Technical Data
- Nominal size basic flange: DN25 – DN100 resp. 1” – 4”.
- Flanges according to DIN PN16/PN25/PN40 resp. ANSI 150 lbs.
- Lining: PFA, PFA-AS (conductive).
- Glass cylinder: borosilicate.
- Hollow ball/seat: PTFE/FFPM (Perlfluor).
- Sample volume standard: 150/250 ml.
- Pump: PTFE, PTFE-AS (conductive).
Modular design
SRS Reactor Sampling Systems are available in the following versions:
SRS-P (PFA-lined)
Sampling is carried out via additional fi ttings by means of vacuum or overpressure.
SRS-P-P (PFA lined, with PTFE diaphragm pump)
Automation of a loop system. Sampling is carried out by forced circulation of the process media by means of a compressed air diaphragm pump.
This system takes the desired sample with vacuum or overpressure.
A wide range of accessories are available for the basic
versions. Each system is tailor-made according to detailed
specifications and custom built.
Operating conditions SRS-P-P
(dep. on material selection/spindle sealing)
- Pressure:
- main valve: 500 mbar (87.25 psi) up to 16 bar (232 psi)
- sight glass unit: up to maximum 7 bar (102 psi)
- Temperature: -40°C (-40°F) up to 180°C (356°F)
© 2021 by Swissfluid USA, Inc.